cart search ChevronLeft ChevronRight phone location mail

Sena Rebellion Linkin RidePal 2 Communicator for LS2 Helmets

Write a Review

Out of stock

The LS2 LinkIn RidePal by SENA in a kit designed exclusively for the LS2 Rebellion Half-Helmet. This kit includes the LinkIn Ride Pal by SENA unit and a pad set that allows for a nearly seamless installation on our LS2 Rebellion Half-Helmet (HELMET IS NOT INCLUDED WITH THIS KIT.) The LinkIn RidePal by SENA is equivalent in technology, features and functionality to several of SENA's current leading products. Functionality (interface) is much like that of the SMH5, but with performance rivaling that of the SMH10. The system allows you to pair 2 phones at the same time and is controlled by three easy to use buttons that are integrated into the pad set on the helmet. It charges with the supplied Micro-USB cable. (Any USB port will charge it.) It features SENA's proprietary Digital Signal Processing, (DSP) for noise cancellation. To let you know the device is turned on or off, the device has voice prompts for "hello" and "goodbye." The IRP device manager allows you to upgrade the firmware and configure the device settings directly from your pc by downloading the LS2 interface, which is both Windows and Mac compatible. Using this software, you can assign speed dial presets and more. This unit can be paired with up to 3 other SENA intercoms on a 1 to 1 basis (total 4 units including yours), with a range of approximately 400 meters. You can even share your music with your intercom partner. Additionally, this system also supports the Universal Intercom Function. This means you can intercom with a non-SENA Bluetooth system using the IRP if the other system supports Hands-Free Profile (HFP).

• Works EXCLUSIVELY in LS2 Helmets Rebellion half-helmet
• Can pair to two cell phones at one time
• Internal 3 way intercom support
• Digital signal processing noise Cancellation
• Can be connected to non-SENA intercom if other system supports HFP
• Bluetooth unit only - DOES NOT INCLUDE HELMET


Sena Technologies, Inc. (“Sena”) warrants that this product (“Product”) shall conform to and perform in accordance with published technical specifications and the accompanying written materials, and shall be free of defects in materials and workmanship for a period of five (5) years for the helmet and two (2) years for the electronic parts, from the date of purchase by the first consumer purchaser of the Product except for the PowerPro Mount or Powerbank. The devices have a Warranty Period of only one (1) year from the date of purchase by the first consumer purchaser of this product. This warranty is limited to the repair and/or replacement, at Sena's discretion, of defective or non-conforming Product, and Sena shall not be responsible for the failure of the Product to perform specified functions, or any other non-conformance caused by or attributable to: (a) any misapplication or misuse of the Product; (b) failure of Customer to adhere to any of Sena's specifications or instructions; (c) complementary equipment or software not furnished by Sena. Limited warranty service may be obtained by delivering the Product to Sena or to the international distributor it was purchased through, and providing proof of purchase or dated receipt. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent.

Videos Hide Videos Show Videos